iP-8447 ISaGRAF Ethernet PAC, 4-Slot, 80186 80 MHz CPU, MiniOS7
ISaGRAF SoftLogic Ethernet PAC with an 80186 80 MHz CPU, MiniOS7 and four hot-swap slots for I-8K or I-87K I/O modules. RoHS ordering code.
- Embedded ISaGRAF Ver.3 SoftLogic programmable to IEC 61131-3
- 80186 80 MHz CPU running MiniOS7
- Four hot-swap slots for I-8K or I-87K high profile I/O modules
- Dual 10/100 Base-TX Ethernet ports with Modbus TCP/IP Slave support
- Four serial ports: two RS-232, one RS-485 (3000 VDC isolated) and one RS-232/RS-485
- 512 KB battery-backed SRAM to retain data, plus a 64-bit hardware serial number
608,00 € pro Stück
| 1–9 Stück | 608,00 € | |
|---|---|---|
| 10–30 Stück | 590,00 € | −3 % |
| ab 31 Stück | 578,00 € | −5 % |
Produktinformationen "iP-8447 ISaGRAF Ethernet PAC, 4-Slot, 80186 80 MHz CPU, MiniOS7"
The iP-8447 CR is a 4-slot programmable automation controller that runs embedded ISaGRAF Ver.3 SoftLogic, programmed to IEC 61131-3, on an 80186 80 MHz CPU under MiniOS7. It suits engineers who want a PLC-style controller that can host high-performance parallel I/O (I-8K) or serial I/O (I-87K) modules directly in its hot-swap slots, or reach remote I/O over RS-485.
Connectivity is built around dual 10/100 Base-TX Ethernet ports and four serial ports (two RS-232, one RS-485 with 3000 VDC isolation, and one switchable RS-232/RS-485). The controller supports a broad protocol set, including Modbus TCP/IP Slave, Modbus RTU/ASCII Master, DCON, UDP, TCP Client, CAN/CANopen and FTP Client. Data is held in 512 KB of battery-backed SRAM, and each unit carries a 64-bit hardware serial number.
Note that ISaGRAF cannot run on 64-bit Windows 7 or 8 PCs. Where a 64-bit Windows 7 or 8 workstation is in use, Win-GRAF is the appropriate programming environment.
| Product type: | PAC |
|---|---|
| Interface: | Ethernet, RS-232/RS-485 |
| Protocol: | Modbus TCP |
| Ports: | 2 Ethernet, 4 serial |
| Isolation: | 1 kV |
| Power input: | +10 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Technische Daten
| Software | |
|---|---|
| OS | MiniOS7 |
| Protocol | • NET ID • Modbus TCP/IP Slave • Modbus RTU/ASCII Master • Modbus RTU Slave • DCON Protocol • User-defined Protocol • I/O Type: DCON, Modbus RTU remote I/O • FRnet I/O • Send Email • Fbus • Ebus • SMS • UDP Server & UDP Client • TCP Client • CAN/CANopen • FTP Client |
| Development | Embedded ISaGRAF Ver.3 SoftLogic (IEC 61131-3) |
| CPU Module | |
| CPU | 80186 or compatible, 16-bit and 80 MHz |
| 64-bit Hardware Serial Number | Yes |
| EEPROM | 16 KB |
| Flash | 512 KB |
| NVRAM | 31 Bytes |
| SRAM | 768 KB SRAM, 512 KB Dual battery backup SRAM |
| Storage Expansion | Yes, but ISaGRAF does not support |
| Real Time Clock | Provide seconds, minutes, hours, dates, day of week, month, year |
| Watchdog Timer | Yes |
| Display | |
| Type | 5 x Digit 7 Segment LED Display |
| LED Indicators | |
| Status | 3 x Programmable |
| I/O Expansion | |
| I/O Type | I-8K, I-87K series |
| Slots | 4 |
| HMI | |
| Buzzer | Yes |
| DIP Switch | 8-bit for address |
| Push Button | 4 |
| Ethernet | |
| Ports | 2 x RJ-45, 10/100 Base-TX |
| COM Ports | |
| Ports | 2 x RS-232, 1 x RS-485 (3000 VDC Isolated), 1 x RS-232/RS-485 |
| Power | |
| Input Range | +10 ~ 30 VDC (1 kV Isolated ) |
| Consumption | 6.7 W |
| Mechanical | |
| Dimensions (mm) | 231 x 132 x 111 (W x L x H) |
| Installation | DIN-Rail, Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90 % RH, Non-condensing |
Technische Daten laut Hersteller. Änderungen vorbehalten.
Downloads
Anmelden