tGW-715-UL-UTA Modbus TCP to RTU/ASCII Gateway, PoE, 1-port RS-422/485
Wide-temperature Modbus TCP to RTU/ASCII gateway with PoE and one non-isolated RS-422/485 port, bridging serial Modbus devices onto Ethernet. Rated -40 ~ +70 °C.
- Modbus TCP/UDP master and slave, plus Modbus RTU/ASCII master and slave
- Up to 32 TCP connections (masters) per serial port
- Read-cache for faster Modbus TCP/UDP responses and reduced RS-485 bus loading
- Operating temperature -40 ~ +70 °C (UTA version) with conformal coating
- PoE IEEE 802.3af, Class 1, or +12 ~ 48 VDC terminal block power
- 1 x RS-422/485 non-isolated port, up to 115200 bps, 1 kΩ bias resistor
148,00 € pro Stück
| 1–9 Stück | 148,00 € | |
|---|---|---|
| 10–30 Stück | 144,00 € | −3 % |
| ab 31 Stück | 141,00 € | −5 % |
Produktinformationen "tGW-715-UL-UTA Modbus TCP to RTU/ASCII Gateway, PoE, 1-port RS-422/485"
The tGW-715-UL-UTA CR is a compact gateway that lets a Modbus TCP host communicate with serial Modbus RTU or ASCII devices over Ethernet. Because the serial side is carried over TCP/IP, cable length limits of conventional RS-422/485 wiring no longer restrict where field devices can be placed.
This variant is rated for an operating temperature of -40 ~ +70 °C and uses conformal coating for resistance to moisture and salt spray, which suits outdoor-adjacent cabinets and high-humidity sites. It can be powered from a PoE switch (IEEE 802.3af, Class 1) or from a +12 ~ 48 VDC terminal block, and it mounts on DIN-rail.
Read-caching stores recent requests and responses, so repeated queries from several SCADA or HMI masters to the same slave are answered faster and place less load on the RS-485 bus. The -CR ordering code includes a DC-jack to 2-wire power cable, 0.3 M (CA-002-UL).
Applications
- Factory automation
- Building and home automation
- Remote diagnosis and management
- Solar monitoring
| Product type: | Modbus gateway |
|---|---|
| Interface: | Ethernet, RS-422/485 |
| Protocol: | Modbus TCP |
| Ports: | 1 x RS-422/485, 1 x 10/100 Ethernet |
| PoE: | IEEE 802.3af, Class 1 |
| Isolation: | None (COM port) |
| Power input: | +12 ~ 48 VDC, PoE |
| Operating temperature: | -40 ~ +70 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Technische Daten
| Ethernet | |
|---|---|
| Ports | 10/100 Base-TX, 8-pin RJ-45 x 1, (Auto-negotiating, Auto-MDI/MDIX, LED indicator) |
| PoE | PoE (IEEE 802.3af, Class 1) |
| COM Ports | |
| Ports | tGW-715-UL & tGW-715-UL-UTA: 1 x RS-422/485 (non-isolation) tGW-715i-UL & tGW-715i-UL-UTA: 1 x RS-422/485 (3000VDC Signal Isolation) |
| Baud Rate | 115200 bps Max. |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Odd, Even, Mark, Space |
| Data Bit | 5, 6, 7, 8 |
| Stop Bit | 1, 2 |
| Node Address | 254 (max.) |
| Power | |
| Consumption | 0.07 A @ 24 VDC |
| Powered from PoE | IEEE 802.3af, Class 1 |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 52 mm x 27 mm x 95 mm (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | tGW-715-UL & tGW-715i-UL: -25 ~ +70 °C tGW-715-UL-UTA & tGW-715i-UL-UTA: -40 ~ +70 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
Technische Daten laut Hersteller. Änderungen vorbehalten.
Anmelden