CL-210-E PM2.5, Temperature and Humidity Data Logger Module
PM2.5, temperature, humidity and dew point data logger with RS-485 and Ethernet PoE. Stores up to 450,000 time-stamped records and includes a relay output for alarms.
- Measures PM2.5, temperature, humidity and dew point with date and time stamps
- Stores up to 450,000 downloadable records
- Supports DCON, Modbus RTU, Modbus TCP and MQTT protocols
- RS-485 and Ethernet interfaces with PoE support
- One relay output (Form A, SPST) for alarm or IAQ device control
- Real-time data access via iAir Utility, iOS or Android app, or web browser on the local network
349,00 € pro Stück
| 1–9 Stück | 349,00 € | |
|---|---|---|
| 10–30 Stück | 339,00 € | −3 % |
| ab 31 Stück | 332,00 € | −5 % |
Produktinformationen "CL-210-E PM2.5, Temperature and Humidity Data Logger Module"
CL-210-E CR is a data logger module that measures PM2.5, temperature, humidity and dew point, and records each reading with a date and time stamp. Up to 450,000 records can be stored and downloaded, which suits monitoring projects where a complete history of air quality and climate conditions is needed.
The module offers RS-485 and Ethernet connectivity, with PoE support on the Ethernet port. It speaks DCON, Modbus RTU, Modbus TCP and MQTT, so it can be connected to existing HMI, SCADA or IoT platforms in distributed control systems. A single relay output (Form A, SPST) can be used for alarm signalling or for controlling an indoor air quality device.
Configuration, real-time monitoring and log download are handled by the iAir Utility, with iOS and Android apps and web browser access available on the same local network. Log data can be exported to CSV for analysis in standard spreadsheet or industry software.
Applications
- Transportation of food or pharmaceuticals
- Food and beverage industry (HACCP)
- Blood stations and pharmacies
- Building and energy management
- Warehouse management
- Museums, archives and galleries
- Indoor or underground parking lot air quality monitoring
| Product type: | Data logger module |
|---|---|
| Interface: | Ethernet, RS-485 |
| Protocol: | DCON, Modbus RTU, Modbus TCP, MQTT |
| Relay outputs: | 1 (Form A, SPST) |
| Ports: | 2 |
| PoE: | Yes |
| Power input: | +12 ~ +48 VDC |
| Operating temperature: | 0 ~ 50 °C |
| Mounting: | Ceiling/Wall |
Technische Daten
| System | |
|---|---|
| Alarm | PM2.5/RH/Temperature |
| Real Time Clock | Yes |
| Data Logger | Yes, up to 450,000 records |
| Temperature Measurement | |
| Range | -10 ~ +50°C |
| Resolution | 0.1°C |
| Accuracy | ±0.6°C |
| Humidity Measurement | |
| Range | 0 ~ 100% RH, Non-condensing |
| Resolution | 0.1% RH, Non-condensing |
| Accuracy | ±5% RH, Non-condensing |
| Dew Point | |
| Range | Calculated using temperature and relative humidity |
| Resolution | 0.1°C |
| PM2.5 Measurement | |
| Range | 0 ~ 400 μg/m3 |
| Resolution | 1μg/m3 |
| Response Time | <= 1 min. |
| Relay Output | |
| Channels | 1 x Form A, SPST 30 VDC @ 16 A or 250 VAC @ 16 A |
| Ethernet | |
| Ports | 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators) |
| COM Ports | |
| Ports | 1 x RS-485 1 x Ethernet |
| Protocol | DCON and Modbus/RTU (RS-485) Modbus TCP and MQTT (Ethernet) |
| Power | |
| Consumption | Non-PoE: 2.5 W (Max.) PoE: 2.65 W (Max.) |
| Powered from Terminal Block | +12 ~ +48 VDC |
| Mechanical | |
| Dimensions (mm) | Ø 150 x 53 (Ø x H) |
| Installation | Ceiling Mounting/Wall Mounting |
| Ingress Protection Rating | IP20 |
| Environment | |
| Operating Temperature | 0 ~ 50°C |
| Storage Temperature | -30 ~ +75°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Technische Daten laut Hersteller. Änderungen vorbehalten.
Downloads
Anmelden