uPAC-7186EG/I-7188XG/I-7188EG
The I-7188EG CR is a palm-sized programmable automation controller that combines an 80188 processor running at 40 MHz with embedded ISaGRAF Ver.3 SoftLogic, so control logic can be written to IEC 61131-3 and run directly on the unit. It suits compact control tasks where a small footprint and Ethernet connectivity are both needed.Communication is handled by one 10Base-T RJ-45 Ethernet port, one RS-232 port and one RS-485 port, with serial rates up to 115200 bps. The controller supports Modbus RTU/ASCII master operation as well as Modbus RTU and Modbus TCP/IP slave operation, and includes DCON, Fbus and Ebus options along with a user-defined protocol. Where more serial ports or I/O are required, an X-Board expansion board can be fitted.This ordering code is the standard variant without the 5-digit 7-segment LED display offered on the I-7188EGD. The unit mounts on a DIN rail, draws 2.0 W from a +10 to 30 VDC supply and is rated for operation from -25 to +75 °C.ApplicationsEmbedded control logic written in IEC 61131-3 with ISaGRAFModbus communication between Ethernet hosts and serial RTU devices
The I-7188EGD is a palm-sized programmable automation controller that runs embedded ISaGRAF Ver.3 SoftLogic, programmable to IEC 61131-3. It is built around an 80188 CPU running at 40 MHz under the MiniOS7 operating system, and it gives engineers Ethernet connectivity alongside serial communication in a compact DIN-rail housing.Compared with the standard I-7188EG, this variant adds a 5-digit 7-segment LED display, which shows status information directly on the unit. Otherwise the two share the same core features, including the single 10Base-T Ethernet port, one RS-232 port and one RS-485 port.Expansion is possible with an X-Board I/O expansion board, which can add COM ports, I/O or memory.ISaGRAF cannot run on 64-bit Windows 7 or 8 PCs; Win-GRAF is the suggested alternative for those systems.
The I-7188XG CR is a compact programmable automation controller that runs embedded ISaGRAF Ver.3 SoftLogic to IEC 61131-3, making it a practical choice for local control logic in a small DIN-rail footprint. It combines an 80188 CPU at 40 MHz with MiniOS7 and two serial ports for connecting field devices.Two serial ports are provided, one RS-232/RS-485 and one RS-485, both non-isolated and capable of up to 115200 bps. Modbus RTU/ASCII master and Modbus RTU slave functions are supported, alongside DCON, user-defined protocols and remote I/O over DCON or Modbus RTU. An optional X-Board can be fitted to add COM ports, I/O or memory.This variant has no 5-digit 7-segment LED display; that feature is found on the I-7188XGD. Note that ISaGRAF cannot run on 64-bit Windows 7 or 8 PCs, so Win-GRAF is the suitable programming environment in that case.ApplicationsStandalone IEC 61131-3 control logic in compact cabinetsSerial Modbus RTU/ASCII master polling of field devicesSerial device gateways and local I/O on DIN-rail panels
The I-7188XGD is a compact programmable automation controller that runs IEC 61131-3 logic through embedded ISaGRAF Ver.3 SoftLogic on a 40 MHz 80188 CPU under MiniOS7. It suits engineers who need serial device control and local logic in a small footprint on a DIN rail.Two serial ports, RS-232/RS-485 and RS-485, support Modbus RTU/ASCII master and Modbus RTU slave operation, along with DCON and user-defined protocols. The I-7188XGD adds a 5-digit 7-segment LED display to the base I-7188XG, which is useful for showing status values on the unit itself. An X-Board expansion option can add COM ports, I/O or memory if the standard configuration is not enough.Note that ISaGRAF cannot run on 64-bit Windows 7 or 8 PCs. Where that applies, Win-GRAF is the suitable development environment.ApplicationsSerial device control over RS-232/RS-485 networksModbus RTU master or slave communicationLocal logic control in DIN-rail control cabinets
ISaGRAF Based Palm-Sized Serial/Ethernet PAC with 80186-80 CPU, MiniOS7.
ISaGRAF Based uPAC-7186 with 80186-80 CPU, MiniOS7 and 7-Segment LED Display.