DIO-48 ISA Digital I/O Board, 48-ch Bi-directional TTL I/O
DIO-48 CR ISA bus board with 48 bi-directional 5 V/TTL digital I/O channels, buffered I/O lines, selectable pull-up or pull-down resistors and 8255 PPI mode 0 emulation.
- ISA bus interface with 8-bit data bus
- 48 bi-directional 5 V/TTL digital I/O channels in six 8-bit ports
- All I/O lines buffered on the board for higher driving capability
- Pull-up or pull-down resistors on I/O lines for defined unconnected inputs
- Emulates two 8255 PPI ports (mode 0)
- One 32-bit programmable internal timer and one 16-bit event counter
124,00 € pro Stück
| 1–9 Stück | 124,00 € | |
|---|---|---|
| 10–30 Stück | 120,00 € | −3 % |
| ab 31 Stück | 117,00 € | −6 % |
Produktinformationen "DIO-48 ISA Digital I/O Board, 48-ch Bi-directional TTL I/O"
The DIO-48 CR is an ISA bus digital I/O board that gives a PC 48 bi-directional 5 V/TTL channels. The lines are grouped into six 8-bit bi-directional ports, and each port's direction is programmable under software control, so the board can be set up for a mix of inputs and outputs.
Every I/O line is buffered on the board, which provides higher driving capability. Pull-up or pull-down resistors on the I/O lines keep an unconnected digital input at a defined high or low level instead of letting it float. The board emulates two industrial-standard 8255 PPI ports in mode 0, which helps when porting existing 8255-based code.
Timing resources include a 32-bit programmable internal timer and a 16-bit event counter, with four interrupt sources. The board supports daughter boards from the DB-24 and DB-16 families as well as OPTO-22 compatible daughter boards.
Applications
- Digital I/O expansion in ISA bus PCs
- Switching and sensing 5 V/TTL logic signals
- Timing and event counting alongside digital I/O
| Product type: | DAQ board |
|---|---|
| Interface: | ISA |
| Digital inputs: | 48 |
| Digital outputs: | 48 |
| Ports: | 6 x 8-bit |
| Power input: | +5 V, 800 mA |
| Operating temperature: | 0 ~ +60 °C |
| Housing: | Short card |
Technische Daten
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 50-pin box header x 1 |
| Digital Input | |
| Channels | 48 (Bi-Direction) |
| Type | 5 V/TTL |
| Sink/Source (NPN/PNP) | Sink: 64 mA @ 0.8 V Source: 32 mA @ 2.0 V |
| ON Voltage Level | Logic 1: 2.0 V Min. |
| OFF Voltage Level | Logic 0: 0.8 V Max. |
| Response Speed | 1 MHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 48 (Bi-Direction) |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Response Speed | 1 MHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 2 (Event Timer x 1/32-bit Timer x 1) |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Reference Clock | Internal: 4 MHz |
| PC Bus | |
| Type | ISA |
| Data Bus | 8-bit |
| Power | |
| Consumption | 800 mA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 112 x 172 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Technische Daten laut Hersteller. Änderungen vorbehalten.
Downloads
Anmelden