G-4514D-4GAU 4G Power Saving PAC with Solar Charger and LCD Display
G-4514D-4GAU CR is a 4G LTE power saving PAC with a 12 V lead-acid solar charger, 8 analogue inputs (0 ~ 20 mA), 3 digital inputs, 3 open-collector outputs and a relay output for remote monitoring.
- Embedded MiniOS7 with anti-virus support
- GSM, WCDMA and 4G LTE cellular connectivity with TCP and UDP client support
- Solar charger for 12 V lead-acid batteries with low-voltage disconnect at 11.1 V
- 8 analogue inputs (0 ~ 20 mA, 12-bit) plus 3 digital inputs
- 3 open-collector digital outputs (sink NPN, 100 mA max.) and 1 Form C relay output (2 A @ 30 VDC)
- RS-232 and RS-485 serial ports, 1 x RJ-45 Ethernet port
784,00 € pro Stück
| 1–9 Stück | 784,00 € | |
|---|---|---|
| 10–30 Stück | 760,00 € | −3 % |
| ab 31 Stück | 745,00 € | −5 % |
Produktinformationen "G-4514D-4GAU 4G Power Saving PAC with Solar Charger and LCD Display"
G-4514D-4GAU CR is a cellular programmable automation controller for remote sites where mains power and fixed wiring are not practical. It combines a GSM/WCDMA/4G LTE transceiver with a solar charger for lead-acid batteries, so it can run unattended on a small solar installation. The D variant adds a 128 x 64 dot LCM display for local status viewing.
The controller provides 8 current analogue inputs (0 ~ 20 mA), 3 digital inputs, 3 open-collector digital outputs and 1 Form C relay output. Serial communication is available through RS-232 (COM1) and RS-485 (COM2), while a 10/100Base-T(X) RJ-45 port connects the unit to a local network. The embedded MiniOS7 runtime and TCP/UDP client support over 4G LTE make it suitable for logging and forwarding field data from distributed sites.
Built for harsh environments, the metal housing mounts on a DIN rail or wall. The listed operating range is -15 ~ +55 °C. This ordering code is intended for sale in Asia, excluding China.
Applications
- Hydrologic and wind monitoring
- Mudslide monitoring
- Vehicle monitoring and tracking
| Product type: | PAC |
|---|---|
| Interface: | Ethernet, RS-232, RS-485 |
| Protocol: | TCP, UDP |
| Digital inputs: | 3 |
| Digital outputs: | 3 |
| Relay outputs: | 1 |
| Analog inputs: | 8 |
| Ports: | 1 x RJ-45, 1 x RS-232, 1 x RS-485 |
| Power input: | 12 VDC battery, over +16 V charging input |
| Operating temperature: | -15 ~ +55 °C |
| Mounting: | DIN-rail, Wall |
| Housing: | Metal |
Technische Daten
| CPU Module | |
|---|---|
| CPU | 80 MHz internal microprocessor |
| EEPROM | 16 KB, retention > 40 years. 1,000,000 erase/write cycles |
| Flash | 512KB |
| NVRAM | 31 bytes, battery backup, data valid up to 10 years |
| SRAM | 512KB |
| Real Time Clock | Provide seconds, minutes, hours, day of week/month, month and year |
| Watchdog Timer | Yes |
| Display | |
| Backlight Life | Expected life is more than 100,000 hours under normal operation |
| Active Display Area (mm) | 80.61 mm x 14.37 mm (W x H) |
| Lead Acid Battery Charger | |
| Battery Voltage | 12V Lead-Acid Battery |
| Charging Voltage | Voltage of Power Input must be over +16V |
| Low Voltage Protect | Low Voltage disconnect = 11.1V / Low Voltage reconnect = 12.6V |
| LED Indicators | |
| Status | 1 x System 1 x 3G 1 x Charging / Fault |
| 2G System | |
| Data Transmission Rate | GPRS Downlink transfer: Max. 85.6 kbps; Uplink transfer: Max. 42.8kbps |
| Frequency Band | 850/900/1800/1900 MHz |
| Coding Schemes | CS 1, CS 2,CS 3,CS 4 |
| GPRS Multi-slot | GPRS class 10/8; GPRS station class B |
| Power Class | Class 4 (2 W @ 850/900 MHz) Class 1 (1 W @ 1800/1900 MHz) |
| SMS Format | Sending: UCS2/7bits Receiving: UCS2/7bits |
| 3G System | |
| Data Transmission Rate | DC-HSPA+ Downlink transfer: Max. 42 Mbps; Uplink transfer: Max. 5.76Mbps TD-SCDMA Download: Max. 4.2 Mbps; Upload: Max 2.2Mbps CDMA2000 EVDO Download: Max. 14.7 Mbps; Upload: Max 5.4Mbps |
| Frequency Band | WCDMA 850/900/1900/2100 MHz |
| Power Class | Class 3 (24dBm+1/-3dB) for WCDMA |
| SMS Mode | MT, MO, CB, Text and PDU mode |
| 4G System | |
| Data Transmission Rate | LTE Downlink transfer: Max. 100 Mbps; Uplink transfer: Max. 50 Mbps |
| Frequency Band | FDD LTE: B1/B2/B3/B4/B5/B7/B8/B28 TDD LTE: B40 |
| Analog Input | |
| Channels | 8 |
| Type | Current |
| Range | 0 ~ 20 mA |
| Resolution | 12 - bit |
| Accuracy | +/- 2 LSB (+/- 0.0097 mA) |
| Sampling Rate | 1 KHz max. (Read one channel). |
| Isolation | 2500Vrms 3000Dc to DC |
| Digital Input | |
| Channels | 3 |
| Type | Dry Contact |
| ON Voltage Level | Close to GND |
| OFF Voltage Level | Open |
| Isolation | Non-isolated |
| Digital Output | |
| Channels | 3 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Sink (NPN) |
| Load Voltage | +30 VDC max. |
| Load Current | 100 mA max. |
| Isolation | Non-isolated |
| Relay Output | |
| Channels | 1 |
| Contact Rating | Form C: 2A @ 30 VDC 0.25 A @ 250 VAC |
| Mechanical Endurance | typ. 10^8 operations |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100Base-T(X) |
| COM Ports | |
| Ports | 1 x RS-232 1 x RS-485 |
| Power | |
| Consumption | Deep Sleep: < 10 mA @ 12VDC; Deep Sleep(With LCD): < 11 mA @ 12VDC; Sleep: < 15 mA@12VDC; Idle: 90 mA @ 24 VDC; Data Link: 150 ~ 400 mA (peak) @ 24 VDC |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | 47 x 142 x 168 (W x L x H) |
| Panel Cut-out (mm) | 93 mm x 70 mm x 1.6 mm (W x H x T) |
| Installation | DIN-Rall and Wall mount |
| Environment | |
| Operating Temperature | -15 ~ +55 °C |
| Storage Temperature | -20 ~ +70 °C |
| Humidity | 5~90% RH, non-condensing |
Technische Daten laut Hersteller. Änderungen vorbehalten.
Anmelden