SDR-240-24 Power Supply, 88~264 VAC to 24 VDC/10 A, 240 W DIN-rail
240 W DIN-rail power supply accepting 88~264 VAC input and delivering 24 VDC at 10 A, with 94% efficiency, active PFC and a built-in DC OK relay contact.
- 240 W, 24 VDC / 10 A output from an 88~264 VAC input (124~370 VDC also accepted)
- 94% efficiency with active PFC, PF>0.93
- 150% peak load capability for short-term high-current demand
- Built-in DC OK relay contact for output status monitoring
- Output adjustable from 24 to 28 V
- Short circuit, overload, overvoltage and over-temperature protection with auto-recovery
218,00 € pro Stück
| 1–9 Stück | 218,00 € | |
|---|---|---|
| 10–30 Stück | 212,00 € | −3 % |
| ab 31 Stück | 207,00 € | −5 % |
Produktinformationen "SDR-240-24 Power Supply, 88~264 VAC to 24 VDC/10 A, 240 W DIN-rail"
SDR-240-24 CR is a 240 W DIN-rail power supply that converts 88~264 VAC input into a regulated 24 VDC output rated at 10 A. It suits engineers who need a compact, metal-cased supply for industrial control panels and want high efficiency with low heat loss.
The unit combines 94% efficiency with an active power factor correction stage (PF>0.93) and is cooled by free air convection, so no fan is required. Its output can be adjusted between 24 and 28 V, and it can withstand a 150% peak load. A built-in DC OK relay contact allows the output status to be monitored by the control system.
Protection against short circuit, overload, overvoltage and over-temperature is built in, and each unit is given a 100% full load burn-in test. The supply is approved to UL 508 for industrial control equipment and is compliant with the EN 61000-6-2 industrial immunity standard.
Applications
- Industrial control equipment
- Heavy industry environments requiring EN 61000-6-2 immunity
| Product type: | Power supply |
|---|---|
| Relay outputs: | 1 |
| Power input: | 88~264 VAC |
| Operating temperature: | -25 ~ +70 °C |
| Mounting: | DIN-rail |
| Housing: | Metal |
Technische Daten
| Safety | |
|---|---|
| Standard | UL508, TUV EN60950-1 approved |
| EMC | |
| Standard | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A, SEMI F47, GL approved |
| Input | |
| Voltage Range | 88 ~ 264 VAC 124 ~ 370 VDC |
| Frequency Range | 47 ~ 63Hz |
| AC Current (Typ.) | 2.6 A/115 VAC 1.3 A/230 VAC |
| Inrush Current (Typ.) | 33A/115 VAC 65A/230 VAC |
| Leakage Current | <1 mA/240 VAC |
| Output | |
| Ripple & Noise (Max.) | 100mVp-p |
| Voltage Adj. Range | 24 ~ 28 V |
| Voltage Tolerance | ±1.0% |
| Linearity | ±0.5% |
| Load Regulation | ±1.0% |
| Setup, Rise Time | 1500ms, 60ms/230 VAC 3000ms, 60ms/115 VAC at full load |
| Hold Up Time (Typ.) | 20ms/230 VAC 20ms/115 VAC at full load |
| DC Voltage | 24 V |
| Rated Power | 240 W |
| Rated Current | 10 A |
| Efficiency | 94% |
| Protection | |
| Over Voltage | 29 ~ 33V Protection type : Shut down o/p voltage with auto-recovery |
| Overload | Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery >150% rated power, constant current limiting with auto-recovery within 2 seconds and may cause to shut down if over 2 seconds |
| Function | |
| DC OK Active Signal (Max.) | 60 VDC/0.3A, 30VDC/1A, 30VAC/0.5A resistive load |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | (40 * 125.2 * 113.5)mm |
| Environment | |
| Over-temperature Protection | 95°C ±5°C (TSW : detect on heatsink of power switch) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down |
| Temperature Coefficient | ±0.03%/°C (0 ~ 50°C) |
| Operating Temperature | -25 ~ +70°C (Refer to "Derating Curve") |
| Storage Temperature | -40 ~ +85°C |
| Humidity | 20 ~ 95% RH Non-condensing |
Technische Daten laut Hersteller. Änderungen vorbehalten.
Downloads
Anmelden