ET-7067 Ethernet I/O Module, 8-ch Power Relay Output, Modbus TCP
Ethernet I/O module with eight form A power relay outputs, supporting Modbus TCP and Modbus UDP. Programmable power-on and safe values suit hazardous-voltage control applications.
- Eight form A power relay outputs, 5 A @ 250 VAC/24 VDC (resistive load)
- Modbus TCP and Modbus UDP protocol support over a 10/100 Base-TX RJ-45 port
- Programmable power-on value and safe value for each relay
- Optical isolation of 3000 VDC on I/O and 1500 VDC on Ethernet
- Dual watchdog (module and communication, programmable)
- Built-in web server with web HMI and access control by ID, password and IP filter
213,00 € pro Stück
| 1–9 Stück | 213,00 € | |
|---|---|---|
| 10–30 Stück | 207,00 € | −3 % |
| ab 31 Stück | 202,00 € | −5 % |
Produktinformationen "ET-7067 Ethernet I/O Module, 8-ch Power Relay Output, Modbus TCP"
ET-7067 CR is a DIN-rail Ethernet I/O module that gives engineers eight form A (SPST N.O.) power relay outputs, each rated 5 A at 250 VAC or 24 VDC for resistive loads. It is aimed at switching jobs in building, factory and machine automation where the controller talks to the module over Modbus TCP or Modbus UDP.
Each relay has its own programmable power-on value and safe value, so the outputs can be set to a defined state at start-up and during communication faults. The I/O side is optically isolated to 3000 VDC for transient overvoltage protection, and the module can be used where hazardous voltages are present. Note that there is no channel-to-channel isolation between the relays.
The module is powered from a +10 ~ +30 VDC terminal block with reverse polarity protection, and it has a built-in web server with web HMI, ID, password and IP filter access control, and dual watchdogs for the module and communication. It is intended for operation from -25 ~ +75 °C.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP, Modbus UDP |
| Relay outputs: | 8 |
| Ports: | 1 |
| Isolation: | 3000 VDC (I/O) |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Technische Daten
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±2 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
| LED Indicators | |
| Status | Run, Ethernet |
| Relay Output | |
| Channels | 8 |
| Type | Power Relay, Form A (SPST N.O.) |
| Contact Rating | 5 A @ 250 VAC/24 VDC (Resistive Load) |
| Operate Time | 10 ms (max.) |
| Release Time | 5 ms (max.) |
| Electrical Endurance | 10^5 ops. |
| Mechanical Endurance | 2 × 10^7 ops. |
| Power on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-TX |
| Access Control | ID, Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 3.4 W (max.) |
| Powered from Terminal Block | +10 ~ +30 VDC |
| Mechanical | |
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Technische Daten laut Hersteller. Änderungen vorbehalten.
Downloads
Anmelden