iNS-316 16-Port PoE IoT Switch, 10/100 Mbps PSE
16-port 10/100 Mbps PoE/PoE+ (PSE) IoT switch delivering up to 30 W per port, with per-port power scheduling, web GUI management and Modbus, MQTT and SNMP v2c support.
- 16 RJ-45 10/100Base-TX ports, PoE/PoE+ PSE compliant with IEEE 802.3af/at
- Up to 30 W per PoE port at 48 to 57 VDC power input
- Individual power on/off and power reset schedules for each PoE port
- Web GUI for Ethernet status and PoE voltage, current and consumption monitoring
- Redundant dual power inputs with reverse polarity protection
- Ethernet bypass on Ports 15 and 16 during power failure, supporting daisy chain
525,00 € pro Stück
| 1–9 Stück | 525,00 € | |
|---|---|---|
| 10–30 Stück | 509,00 € | −3 % |
| ab 31 Stück | 499,00 € | −5 % |
Produktinformationen "iNS-316 16-Port PoE IoT Switch, 10/100 Mbps PSE"
iNS-316 CR is a 16-port IoT switch with 16 RJ-45 10/100Base-TX ports, all PoE/PoE+ PSE capable and compliant with IEEE 802.3af/at. Each port can supply up to 30 W from a 48 to 57 VDC power input, making it suited to powering cameras and other remote PoE devices from a single switch cabinet.
Each PoE port has its own power on/off schedule and power reset schedule, so devices can be switched off when not needed to save energy, or cycled regularly to keep them running well. The built-in web GUI shows Ethernet status along with PoE voltage, current and consumption. Ports 15 and 16 support Ethernet bypass through daisy chaining, so the data path is maintained if the unit loses power.
Dual power inputs can be connected to live DC sources at the same time, so the unit keeps running if one supply fails. The manufacturer recommends a dual input supply when total PoE load exceeds 60 W. With SNMP v2c, Modbus and MQTT support, the switch can also be integrated into monitoring and control systems, and it includes a relay alarm output.
Applications
- Factory Automation
- Remote PoE Power Management
- Web Camera Monitoring System
| Product type: | IoT Switch |
|---|---|
| Interface: | RJ-45 |
| Protocol: | Modbus, MQTT, SNMP V2c |
| Relay outputs: | 1 |
| Ports: | 16 |
| PoE: | PoE/PoE+ PSE |
| Isolation: | 1500 Vrms |
| Power input: | 48 ~ 57 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Metal |
Technische Daten
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ± 1 kV |
| ESD (IEC 61000-4-2) | ± 4 kV Contact |
| LED Indicators | |
| Status | PWR1, PWR2, Fault, PoE, Link/Act |
| Ethernet | |
| Ports | 16 x RJ-45, 10/100Base-TX |
| Standards | IEEE 802.3 for 10 Base-T IEEE 802.3u for 100 Base-TX IEEE 802.3x for Flow Control, Back Pressure Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
| Processing Type | Store & forward |
| MAC Table | 16K |
| Frame Buffer Memory | 4Mbit |
| Isolation | 1500 Vrms 1 minute |
| PoE Technology | |
| PoE Compliance | 100% IEEE 802.3at compliant |
| PoE Power | Up to 30 watts per port |
| PoE Pin Assignments | V+ (pin 1, 2), V-(pin 3, 6) , alternative A |
| PoE Voltage | +46 ~ +57 VDC depending on power input |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 48 ~ 57 VDC Redundant dual Input |
| Redundant Power Inputs | Yes |
| Consumption | 0.10 A @ 53 VDC without PD loading, 10A @ 53VDC with PD full loading (30W per ports) |
| Alarm Output | Yes, Relay 1 A @ 30 VDC |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | DIN-rail mounting: 44 x 179 x140 mm |
| Installation | DIN-rail mounting or wall mounting (optional) |
| Environment | |
| Operating Temperature | -25 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
Technische Daten laut Hersteller. Änderungen vorbehalten.
Downloads
Anmelden